Tjernlund AD-1 Draft Inducer for Woodburning Stoves
$175.00
– On Demand Draft Inducer Rated for Wood Burning Applications
– Eliminate “Puff Backs” and down-draft conditions. Improve Draft for short chimney runs or runs with horizontal pipe
– Fits Single Wall Pipe from 5″ – 8″ diameter
– Variable Speed Control runs on 110v and only draws .8 amps at maximum speed
– Fan can take up to 700 degree heat. Control is rated to 104 degrees, but can be mounted remotely
– Run as Needed. If fire drafts well once established, inducer can be turned off. Alternatively it can be turned on before loading wood to eliminate “puff backs”.
– DIY Installation. Use Template to cut hole in pipe, screw in place, and bring power to fan
– Tjernlund AD-1 Draft Inducer Installation Instructions Can Be Found Here (Click Here)
– Feel free to call us at 1-800-685-8263, email us at info@volko.com, or contact us with questions
Description
|
The AD-1 Auto-Draft*… The most economical draft inducer for your wood burning stove. |
|
| Draft inducers are electrically operated devices which increase the air flow up a chimney. This action increases the negative pressure (draft) in the stove, preventing smoke from leaking out of pipe, seams or doors. Perfect for tough smoky “start ups”. For use on coal and wood stoves, wood furnaces, wood boilers, pellet stoves** and most other solid fuel appliances needing additional draft to function more efficiently. With Auto-Draft your hard starting stove draws immediately. No smoky back up even with moist hard to ignite types of wood. Once the fire is burning, adjust the variable speed control knob on electrical box for maximum efficiency of your stove. Auto-Draft provides for total utilization of your wood, leaving only a fine ash residue in most cases. A simple solution to a sometimes complicated problem….. |
|
Eliminates Smoke when loading.
Overcomes flow reversal in non-self-starting chimneys.
Establishes fires quickly.
Encourages complete utilization of fuel, leaving a fine ash.
Specially designed heat resistant, radial type blower.
Easily installed.
Variable speed control.
Fits 5, 6, 7 and 8″ diameter stovepipe.
Operates on standard 110 VAC.
Draws .8 amps (maximum).
Dimensions: 11 5/8″ x 8 1/2″ x 7 1/2″.
Weight: 9 1/2 lbs
Solve smoking problems from appliances with exposed interior single wall flue pipe
Great DIY project. Easily installs by cutting a rectangular 8 5/8” x 3 1/8” hole in the single wall flue pipe from the stove.
Vertical mounting, you need at least 12 to 24” clearance above the stove. A closer mounting may be possible with some form of heat shield to deflect rising heat from “cooking” the fan controls. The AD-1 has a heat-treated housing that allows it to withstand pipe temperatures up to 700 degrees and even though the unit gets HOT from the high pipe temps the ambient room air around the controls should not exceed 104 degrees.
On a horizontal pipe installation the fan must be in attached to the underside of the pipe and concern be placed on its distance from a combustible wall surface. This installation may also keep the unit cooler as it will be further from the heat source.
The fan is only pre wired to the speed control…. There is no “plug-in” cord off the control box, but the unit only draws .8 amps, so a wired plug can be attached to use a close wall outlet. A conduit pipe should be part of the electrical installation, mostly to protect the cord from touching and accidentally melting on the hot flue pipes.
After installation, a turn on the variable speed switch allows smoke free loading and tending of your wood stove.
Reviews
There are no reviews yet.