Flush no frame Trimline Vents

Flush Mount for Clean Look, No Frame to minimized appearance

Flush No Frame Trimline Vents

Slim, trim, flush styling with the cleanest look possible. Seats flat on the subfloor. May be installed permanently or as a lift-out vent to permit cleaning of the duct throat. Delicate looking, but tough. The frame is eliminated for a more condensed size.

Stock Sizes for Flush No Frame Trimline Wood Vents

Custom Options for Flush No Frame Trimline Vents

Sometimes Stock Won’t Work

We get that.  As a matter of fact, Volko is known for our custom work.

So what can we customize?

Duct Opening:  This is the most common part of the wood vent that we make changes to. The smallest duct opening we can do is 2″, and the largest for one vent we can do is 48″.  Need bigger?  We can make the vent in multiple pieces.

Vent Thickness:  Our standard thickness for flush mount wood vents is 3/4″.  We can go thicker or thinner depending on your needs.  This is most commonly done for engineered floors, or floors that have been sanded in the past.  3/8″ thick is the thinnest we can go.

Rail Width:  We can increase or decrease the width of the “rail” (border) in order to fit your opening needs.

Custom Divider Width: Some customers want one vent to cover two openings, with  a certain amount of space in the middle.  We can do a custom divider (space and size) to cover that area.
 
Any questions feel free to call us at 1-800-685-8263, contact us with our form,  or email us at info@volko.com

Details of Flush No Frame Trimline Vent Construction

DAMPERS ARE NOT AVAILABILE FOR FLUSH NO FRAME VENTS

Shop Drawings Available

Custom Wood Vent Drawing

Shop Drawings for Wood Vents

Sometimes your builders, architects, or clients would like a shop drawing of the wood vents before they commit to them. Other times we are doing large custom vent orders and need to confirm that everyone is on the same page. Whatever the case may be, we can help provide you with the information you need.

Stain, Clear Coat, and Custom Finishes

Our wood vents come sanded and ready to finish from the factory. We also provide clear coating services in matte, satin, and gloss.
Want to match your existing flooring or vents? Send us a sample and we will match your finish no problem.

WoodVent Free Air Flow

Wood Vents are more restrictive than metal air registers with the same duct size.  This usually is not a problem, but we can always discuss any concerns you may have  or special applications with our engineers.

For the Trimline style wood vents, there is a 60% reduction in free area caused by the vent louvers.  This means a 10×10 duct will have 40 square inches of free area once a trimline vent is installed.

Again, feel free to call for any assistance with air velocities and sizing.

Volko Supply Co

205 Herricks Rd, New Hyde Park, NY, 11040

Phone: (516) 741-4466

Fax: (516) 741-4470

Email: info@volko.com

X